Billion Electric Company 800VGT manual Rear Ports, Power Switch, Console Port LAN port, Antenna

Billion 800VGT Router

The Rear Ports

The Ethernet Port # 4 can be used as a console port. You need a special console tool which is included in the package, to connect between LAN port 4 and a PC’s RS-232 port (9-pin serial port).

Port

Meaning

1		Power Switch	Power ON/OFF switch
2		PWR	Connect the supplied power adapter to this jack.
			When the router is turned on ￿ the reset button is used to:
			Reset the router: press for 1-3 seconds:
			Restore factory default settings: press for more than 6
3		RESET	seconds, and power cycle the router: (useful if you cannot
			login to the router or have forgotten your Username/Password.)
			Caution: After pressing the RESET button for more than 6 seconds,
			to be sure you power cycle the device.
		LAN	To connect your router to a PC or an office/home network of
			10Mbps or 100Mbps use a UTP Ethernet cable (Cat-5 or
4		1X — 4X	Cat-5e) and connect to one of the LAN ports.
		(RJ-45 connector)	Caution: Port 4 can be either a LAN or a Console port at any time but
			not simultaneously.
			Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to LAN Port 4
4		Console Port (LAN port 4)	and connect to the computers RS-232 port via the supplied
		(RJ-45 connector)	adaptor.
			Caution: Port 4 can be either a LAN or a Console port at any time but
			not simultaneously
		Phone
5		1X — 2X	When using the VoIP functions, connect an analogue phone to
			this port using a RJ-11 cable.
		(RJ-11 connector)
		LINE	When using the VoIP functions, use a RJ-11cable to connect
6
			this port to the telephone wall jack..
7			Use the supplied RJ-11 (“telephone”) cable to connect this port
		ADSL	to the ADSL/telephone wall jack .
8		Antenna	Connect the detachable antenna to this port.
			9
	Chapter 2: Installing the router