Installation Instructions

REMOVING THE DOORS (Double Door Refrigerator Models only)

IMPORTANT NOTES

NOTE: Door swing is not reversible.

Read the instructions all the way through before starting.

Handle parts carefully to avoid scratching paint.

Set screws down by their related parts to avoid using them in the wrong places.

Provide a non-scratching work surface for the doors.

IMPORTANT: Once you begin, do not move the cabinet.

These instructions are for removing the doors.

Unplug the refrigerator from its electrical outlet.

Empty all door shelves, including the dairy compartment.

TOOLS YOU WILL NEED

 

3/8￿and 10 mm Socket

Adjustable Wrench￿

Ratchet/Driver

 

 

Masking Tape

Thin-blade Screwdriver

1REMOVE THE REFRIGERATOR DOORS

ATape the doors shut with masking tape.

(for water dispenser models)

BStart with right-hand door first: Remove the screw securing the center hinge cover, lift the hinge cover and place to the side on top of the refrigerator.

Remove hinge cover (1 Phillips screw)

(for water dispenser models)

CRemove water coupling and power coupling.

Phillips Screwdriver

C1

Water Coupling

Remove the metal spring clip. Use a screwdriver to push the red plastic locking clip down and off.

C2

 

Water Coupling

Push red collar

 

and hold.

Pull tube.

C3

Power Coupling

Black mark flush with collar assembly

Pull apart power coupling to disconnect

30

Page 30
Image 30
GE 49-60612, 200D9366P020 Removing the Doors Double Door Refrigerator Models only, Tape the doors shut with masking tape