Installation Instructions
REPLACING THE FREEZER DRAWER (on some models)
Two people may be required to complete this procedure.
1REPLACE THE BASE GRILLE
(if removed earlier)
CAUTION: Be careful not to overtighten the screws since this may crack the grille.
Align the base grille and replace the 2 Phillips- head screws on either side of the base grille.
2ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES
APull out the rail assemblies to the full length on each side of the cabinet.
BThere are two tabs on each drawer rail and two slots on each rail assembly on the refrigerator. Align the drawer rails with the rail assemblies, tilt the drawer toward the refrigerator, and seat the tabs into the slots of the rail assembly. Lower the drawer into position.
2ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES (CONT.)
CReplace the hex-head screws to secure the drawer.
Screw
3REPLACE THE FREEZER BASKET
ATilt the basket forward and lower it into the drawer.
BLower the freezer caddy ensuring the hook fits over the front edge of the bottom freezer basket. Push down to secure.
CSeat the basket onto the metal slide brackets and over the swing locks.
DTurn the swing locks from horizontal to vertical position to lock the basket in place.
ETurn the divider slightly to one side so the tabs on the front fit into the vent slots on the basket. Position the divider so the back locating tabs snap into place in the back vent slots.
Slot Tab
26
