Installation Instructions
REMOVING THE FREEZER DRAWER (on some models)
The freezer drawer can be removed, if needed, to fit through tight areas.
Read these instructions completely and carefully.
1REMOVE THE BASKET
AOpen the freezer drawer until it stops.
BLift the freezer caddy up.
CPull the divider forward until the rear locating tabs are out of the slots. Turn the divider slightly to the side to release the front locating tabs and lift out.
DThe freezer basket rests on the metal slide brackets and is held in place with swing locks.
ETurn the swing locks from vertical to horizontal position. Open refrigerator doors.
FLift the basket up and rotate it toward you. Slide out from the side of the drawer.
A |
3REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and refrigerator door, the refrigerator will still not fit through a doorway, the base grille can be removed.
ARemove the 2
BPull the grille straight out.
2
REMOVE THE DRAWER FRONT FROM THE SLIDES
A
Remove the
B
Tilt the drawer front toward the refrigerator and lift out.
Rail 
assembly
Screw
C
D
Set the drawer front on a
Push the rail assemblies back into the cabinet.
25
