
About the shelves and bins.
Adjustable Bins on the Door
Adjustable bins can easily be carried from refrigerator to work area.
To remove: Lift bin straight up, then pull out.
To replace or relocate: Slide in the bin just above the molded door supports, and push down. The bin will lock in place.
The snugger helps prevent tipping, spilling or sliding of small items stored on the door shelf. Grip the finger hold near the rear of the snugger and move it to fit your needs.
To remove: Lift the bin straight up, then pull out.
To replace: Engage the bin in the molded supports on the door and push down.
It will lock in place.
Safety Instructions |
Operating Instructions |
Installation Instructions |
Adjustable Divider in Freezer Basket
The freezer basket has a divider that can be
both repositioned or removed.
To remove: Pull the divider forward until the
rear locating tabs are out of the slots. Turn
the divider slightly to the side to release the
front locating tabs and lift out. Tabs
To replace: Turn the divider slightly to one side so the tabs on the front fit into the vent
slots on the basket. Position the divider so the back locating tabs snap into place in the back vent slots.
To reposition: Remove the divider. Slide the divider left or right to the desired location and replace as instructed above.
Troubleshooting Tips |
Consumer Support |
Optional Freezer Caddy
Caddy | The optional freezer caddy fits over the front | To replace: Lower the freezer Caddy ensuring |
| edge of the bottom freezer basket and can | the hook fits over the front edge of the |
| be removed or added as needed. | bottom freezer basket. Push down to secure. |
To remove: Lift the freezer caddy up.
About the additional features.
Not all features are on all models.
Non-Adjustable Beverage Rack
To remove: Lift the rack straight up, then pull out.
| To replace: Engage the rack in the molded |
8 | supports on the door and push down. It will |
lock in place. |