About the shelves and bins. | GEAppliances.com |
|
|
Not all features are on all models.
Safety
Some models have wire shelves that can be adjusted in the same manner.
Rearranging the Shelves
Shelves in the refrigerator compartment are adjustable.
Refrigerator Compartment
To remove:
Remove all items from the shelf.
Tilt the shelf up at the front.
Lift the shelf up at the back and bring the shelf out.
To replace:
While tilting the shelf up, insert the top hook at the back of the shelf in a slot on the track.
Lower the front of the shelf until the bottom of the shelf locks into place.
Instructions Operating Instructions
Spillproof Shelves (on some models)
Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. To remove or replace the shelves, see Rearranging the Shelves.
Installation Instructions
Slide-Out Spillproof Shelf (on some models)
The
To remove:
Remove all items from shelf.
Slide the shelf out until it stops.
To replace:
Place the rear shelf tabs just in front of the central notches on the shelf frame.
Slide the shelf in until the central tabs are slightly behind the front bar.
Lower the shelf into place until it is horizontal and slide the shelf in.
Troubleshooting Tips
Lift the front edge of the shelf until the | Make sure that the shelf sits flat after |
central tabs are above the front bar. | reinstallation and doesn’t move freely from |
Continue pulling the shelf forward until it | side to side. |
| |
can be removed. | Make sure you push the shelves all the way in |
| before you close the door. |
7
