Installation Instructions
1REMOVE THE REFRIGERATOR DOORS (cont.)
DRemove the hinge cover on top of the refrigerator door by removing the Phillips head screws and pulling it up.
EUsing a 5/16socket ratchet/driver, remove the bolts securing the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door.
Hinge Cover
Top Hinge
FRemove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door.
GSet the door on a non-scratching surface with the inside up.
2REMOVE CENTER HINGE
Using a 5/16 socket ratchet/driver, remove the bolts securing the center hinge to the cabinet. Set the hinge and bolts aside.
3REMOVE OPPOSITE DOOR
Follow the same procedure on the opposite door. There are no wires, water lines or center hinge covers on the opposite side.
4REMOVE FREEZER DRAWER
Refer to the Removing the Freezer Drawer section for instructions.
31
