65
ERROR MESSAGE LIST
ERROR MESSAGE LIST
ERROR MESSAGE CAUSE SOLUTION
ALL FILES ARE
USED
●This message appears if there are no
empty files available when NEW or
SAVE AS (FILE menu) is selected.
●Delete unneeded files to
make space for new ones.
BARCODE MUST
START & END WITH
A, B, C OR D
●This message appears if A, B, C or D
has not been entered at the begin-
ning and end of a barcode with the
CODABAR protocol.
●Enter A, B, C or D at the
beginning and end of the
barcode.
BUFFER EMPTY ●This message appears if no text has
been typed in when you press
or , when you hold and
press or , or when you
press after selecting
BLOCK, LINE or CHARACTER
(FRAME or SHADING menus), or
SAVE AS or SAVE (FILE menu).
●Type in some text before
trying to perform any of
these operations.
BUFFER FULL ●This message appears if enough text
has already been entered to fill the
buffer, and you try to paste in text or
add a character, a space, a new
line, a new block, a symbol, an
accented character or a barcode.
●This message appears if enough text
has already been entered to fill the
buffer, and you press , ,
, , , , or .
●Delete some of the text
before trying to add any
more.
●Delete some of the text
before trying to change
the text format.
CAN’T FIND FILE ●This message appears if a file with
the entered file name cannot be
found.
●Search for a different file
name.
CLOSE CASSETTE
COVER
●This message appears if the tape
compartment cover is open.
●Close the compartment
cover.
CUTTER ERROR
TURN POWER OFF,
THEN ON AGAIN
●This message appears if the cutter
did not operate correctly.
●Turn off the P-touch, and
then turn it on again.
EEPROM ERROR
TURN POWER OFF,
THEN ON AGAIN
●This message appears if there is a
problem with the machine’s memory.
●Contact your service rep-
resentative.
HALF CUT ERROR
TURN POWER OFF,
THEN ON AGAIN
●This message appears if the half cut-
ter did not operate correctly.
●Turn off the P-touch, and
then turn it on again.
Area
All
Print Code
Area
All
Zoom
Image
New Block
/
Font
Size Width Style Italic
/
Vert