Brother PT-9400 manual Size Size, Font, Brussels, To change the font before entering the text

To change the font before entering the text:

1Press , , , or until the cursor is moved to the point where you want to begin using a different font.

2 Press Font until the desired font is selected. The current setting is shown below FONT at the top of the display and a sample (A) can be seen to the right of the cursor.

Ch. 3 Functions

Size ( Size )

The character size can be adjusted using the Size function. With the AUTO setting, the machine compares your text with the width of the installed tape and automatically adjusts the characters to the largest possible size. Refer to page 81 for examples of the Size settings. The size of the text at the cursor’s current position is shown at the right end of the second line in the top of the display.

	Back-	Half
Caps Alt Template Zoom ground		Cutter
FONT			36mm	1 1/2"
BRUSSELS			24mm	1"
A			18mm	3/4"
			12mm	1/2"
			9mm	3/8"
			6mm	1/4"
	A
Style	Italic Vertical

Back-	Half
Caps Alt Template Zoom ground	Cutter

5.3" HELSI

MARGIN:WIDE AUTO

r t B e c k e r T r a n s p o r t

	A
Style	Italic Vertical

36mm 1 1/2"

24mm 1"

18mm 3/4"

12mm 1/2"

9mm 3/8"

6mm 1/4"

3Type in the new text.

To change the font of the text in a selected area:

1 Hold down Code and press AreaAll to select all

of the text, or press	Area	and use	,	,
	All

, or to select only a part of it.

2 Press Font			until the text is displayed in the
	desired font. The current setting is shown
	below FONT at the top of the display.
			Back-	Half
	Caps Alt Template Zoom ground			Cutter
		FONT			36mm	1 1/2"
		BRUSSELS			24mm	1"
	r t B e c k e r				18mm	3/4"
					12mm	1/2"
	T r a n s p o r t				9mm	3/8"
					6mm	1/4"
			A
		Style	Italic	Vertical
3 Press New Block			. The selected text is displayed
	in the desired font.

NOTE

☞With the AUTO setting selected and 1/2” (12- mm), 3/4” (18-mm), 1” (24-mm) or 1 1/2” (36- mm)-wide tape installed, the size of text with just one line and not containing lowercase let- ters or certain symbols is printed slightly larger.

☞If a very small text size is selected, the text may not be readable in WYSIWYG mode. When editing such small text, turn on the Zoom mode. For more details, refer to page 21.

☞Since the text sizes that can be printed depends on the width of the tape, the following table shows the maximum text size that can be used with each tape width.

Tape widths		Maximum text size
		(in points)
1/4”	(6 mm)	12
3/8”	(9 mm)	18
1/2”	(12 mm)	24
3/4”	(18 mm)	36
1”	(24 mm)	60
1 1/2”	(36 mm)	72

Functions

25