Brother PT-9400 manual Performing basic operations, Code Code, Cancel Cancel, Cursor keys

Ch. 3 Functions

Performing basic operations

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

Although most functions can be used just by pressing their keys, the following keys may be needed with certain functions.

Code ( Code )

To use a function printed in yellow on a key,

hold down	Code
	while pressing the key for the
function that you wish to use.
Enter ( New Block	)

To select a function from a menu or an item from a list, or to apply the selected setting, press

(left)

●To move the cursor one space or character

to the left, press once. If the cursor is at the beginning of a line when this key is pressed, the cursor moves to the end of the previous line.

●To move the cursor to the beginning of the

current	line of text, hold down	Code
		and
press	.

●To move the cursor to the beginning of the

current text block, hold down Shift and

press . If the cursor is already at the

New Block

.

beginning of a text block when these keys are pressed, the cursor moves to the begin-

Functions

Cancel ( Cancel )

To quit a function without applying any changes that you may have made, press Cancel .

Cursor keys

The four cursor keys ( , , , and )

can be used to perform two operations: to move the cursor, which appears as either a bracket ([) or an underline (_), or to make a selection.

(right)

●To move the cursor one space or character

to the right, press once. If the cursor is at the end of a line when this key is pressed, the cursor moves to the beginning of the next line.

●To move the cursor to the end of the current

line of text, hold down	Code	.
	and press

●To move the cursor to the beginning of the

next	text block, hold down Shift	and
press	.

●To select the item on the right in a list, press

.

ning of the previous block.

●To select the item on the left in a list, press

.

(up)

●To move the cursor to the character in the line directly above the cursor’s current posi-

tion, press once.

●To move the cursor to the beginning of the

entire text, hold down	Code	.
	and press

●To select the item above in a menu or list, press .

(down)

●To move the cursor to the character in the line directly below the cursor’s position,

press once.

●To move the cursor to the end of the entire

text, hold down	Code	.
	and press

●To select the item below in a menu or list, press .

14