Selecting a programme and operating your machine
Auxiliary function
Buzzer cancel
9
Your machine will send out a buzzer warning when the programme comes to an end. If you do not want to hear this warning, you need to press the Buzzer cancel button. The relevant LED will light up when this button is pressed and an audio warning will not be given when the programme comes to an end.
Filter cleaning
A warning LED will light up to remind you to clean the filter after the programme finishes.
If the filter cleaning warning LED lights up continuously, please refer to the ‘Troubleshooting’ section (page 14).
Water tank
A warning LED will light up at the end of the programme or when the tank is full with water. The machine stops operating when this warning LED lights up. To restart the machine, please drain the water in the water tank. Press Start/Pause/Cancel button to start the programme after you have emptied the water tank. The warning LED goes off and the programme resumes operating.
Starting the programme
Press the Start/Pause/Cancel button to start the programme. The Start/Pause/Cancel button will light up to indicate that the programme has started.
Progress of programme
Progress of a running programme is shown through the programme
At the beginning of every programme step, the relevant indicator LED will light up and light of the completed step will turn off.
Drying
Drying level will be illuminated during the whole drying process until the drying degree reaches Ready to Iron.
Ready to Iron
Starts to illuminate when the drying degree reaches the Ready to Iron step and remains illuminated until the next step.
Ready to Wear
Starts to illuminate when the drying degree reaches the Ready to Wear step and remains illuminated until the next step.
End/Wrinkle Guard
Illuminates when the programme comes to an end and the
If more than one LED lights up or flashes concurrently, it means there is a malfunction or a failure. Please refer to the ‘Troubleshooting’ section (page 14).
