14
Troubleshooting
Problem | Cause | Explanation / Suggestion | |
Drying process | The filter cover and filter drawer | Check the filter cover and filter drawer | |
takes too long. | may need cleaning. | are free of lint. Clean if required. | |
Laundry is still wet | The filter cover and filter drawer | Check the filter cover and filter drawer | |
at the end of the | may need cleaning. | are free of lint. Clean if required. | |
drying cycle. |
|
| |
The machine may be overloaded. | Check that the load size does not | ||
| |||
|
| exceed the maximum capacity for the | |
|
| product. | |
|
|
|
Machine does not switch on, or the programme does not start.
The product may not have been | Make sure the power cord is plugged |
plugged in. | in and machine is switched on. |
|
|
The loading door may be ajar. | Ensure that the loading door is |
| properly closed. |
|
|
Programme may not have been set, | Check the programme has been |
or the Start/Pause/Cancel button | selected and that it is not in |
may not have been pressed. | Pause mode. |
|
|
Childproof lock may have been | Deactivate the childproof lock. |
activated. |
|
|
|
Programme has been interrupted without any cause.
The loading door may be ajar | Ensure the loading door is properly |
| closed. |
|
|
The power supply may have been | Check the power cord is plugged in. |
cut off to the machine. | Press Start/Pause/Cancel button to |
| start the programme. |
Laundry has shrunk, become felted, or deteriorated.
A programme not suitable for the type of laundry may have been used.
Dry only the laundry which is suitable for drying in your machine after checking the care label on your clothes.
Select a programme with a suitable low temperature for the laundry type.
Drum lighting does not come on.
The machine may not have been | Ensure that the machine is on. |
turned on using the On/Off button. |
|
|
|
The bulb may have blown. | Call your nearest Fisher & Paykel |
| Authorised Repairer to replace |
| the bulb. |
|
|
tank full warning | Wrinkle Guard programme may be | Drain the water in the water tank. |
LED is on. | running. | Press Start/Pause/Cancel to resume |
|
| |
| Water Tank may be full. | programme. |
Clean filter LED | The filter may need cleaning. | Check the filter cover is free of lint. |
is on. |
| Clean if required. |
|
|
|