Brother PT-9400 manual OK to PRINT?, Print Stamp Print Label, New, Save AS

Functions

Ch. 3 Functions

To print a label or stamp created using a tem- plate:

E Press or until 9 moves beside

PRINT.

F Press New Block .

NOTE

Be sure that the correct tape cassette is installed.

●When printing a stamp, install a stamp film cassette.

●When printing a label, install a label tape cas- sette.

If a template other than one from the STAMP category was used, the following display appears.

		Back-	Half
Caps	Alt Template Zoom ground		Cutter
!	OK TO PRINT?			36mm	1 1/2"
				24mm	1"
				18mm	3/4"
OK
OPTION				12mm	1/2"
CANCEL				9mm	3/8"
				6mm	1/4"
		A
	Style	Italic Vertical

If a template from the STAMP category was used, the following display appears.

			Back-	Half
Caps		Alt Template Zoom ground		Cutter
!		OK TO PRINT?			36mm	1 1/2"
					24mm	1"
					18mm	3/4"
	PRINT STAMP
	PRINT LABEL				12mm	1/2"
	CANCEL				9mm	3/8"
					6mm	1/4"
		A
		Style	Italic Vertical

GPress or until 9 moves beside the desired setting.

For a label created using a template other than one from the STAMP category:

To print, select OK. Refer to page 49 for more details on printing.

To change the printing options, select OPTION. Refer to pages 49 through 54 for more details on the printing options.

For a stamp created using a template from the STAMP category:

To print out a stamp stencil, select

PRINT STAMP.

To print an identification label, select

PRINT LABEL.

NOTE

Use 1/2” (12-mm)-wide tape to make an identifica- tion label for a stamp with a STAMP M size and use 3/4” (18-mm)-wide tape to make a label for a stamp with a STAMP L size.

H Press New Block .

To store the label or stamp created using a tem- plate:

I Press or until 9 moves beside

FILE.

J Press	New Block .
		Back-	Half
Caps	Alt Template Zoom ground		Cutter
[ ]:CONFIRM			36mm	1 1/2"
	FILE		24mm	1"
	NEW		18mm	3/4"
	SAVE AS
	SAVE		12mm	1/2"
			9mm	3/8"
			6mm	1/4"
	A
	Style	Italic Vertical

44