Brother PT-9400 manual Vertical Vert, To change the Vertical setting before entering the text

Vertical ( Vert )

With the Vertical function, you can print your text vertically along the length of your label.

OFFON

When the Vertical function is turned on for the text at the cursor’s current position, the Vertical indicator at the bottom of the display lights up.

NOTE

While selecting a Vertical setting, the following operations may be used:

☞To select the default setting (OFF), hold down

Shift

and press Vert .

☞To return all text formatting functions to their

Code

default settings, hold down and press

(space bar).

☞To return to the text without making any

Ch. 3 Functions

2 Press Vert to select either ON or OFF. The current setting is shown below VERTICAL at the top of the display and a sample (A) can be seen to the right of the cursor.

	Back-	Half
Caps Alt Template Zoom	ground	Cutter
VERTICAL			36mm	1 1/2"
ON			24mm	1"
A			18mm	3/4"
			12mm	1/2"
			9mm	3/8"
			6mm	1/4"
A
Style	Italic	Vertical

3Type in the new text.

To change the Vertical setting for the text in a selected area:

1 Hold down Code and press AreaAll to select all

Functions

Cancel

changes, press .

Back-	Half
Caps Alt Template Zoom ground	Cutter

0.0" HELSI

36mm 1 1/2"

of the text, or press AllArea and use , ,

, or to select only a part of the text.

2 Press Vert until the text is displayed with the desired Vertical setting. The current setting is shown below VERTICAL at the top of the

MARGIN:WIDE AUTO 24mm 1"

18mm 3/4"

12mm 1/2"

9mm 3/8"

6mm 1/4"

A

StyleItalic

To change the Vertical setting before entering the text:

1Press , , , or until the cursor is moved to the point where you want to begin using a different Vertical setting.

display.

		Back-	Half
Caps Alt Template Zoom ground			Cutter
	VERTICAL			36mm	1 1/2"
	ON			24mm	1"
	B e c k e r			18mm	3/4"
				12mm	1/2"
	n s p o r t			9mm	3/8"
				6mm	1/4"
		A
	Style	Italic Vertical
3 Press New Block		. The selected text is displayed

with the desired Vertical setting.

31