Brother PT-9400 manual Style Style, Outline, To change the style of the text in a selected area

Ch. 3 Functions

Style ( Style )

You can choose from 7 different text styles to create more personalized labels. Refer to the style samples on page 82. The style of the text at the cursor’s current position is shown by the Style indicators at the bottom of the display.

NOTE

While selecting a Style setting, the following opera- tions may be used:

☞To display the previous setting, hold down Code and press Style .

☞To select the default setting (NORMAL), hold

down Shift and press Style .

☞To return all text formatting functions to their

Code

default settings, hold down and press

(space bar).

☞To return to the text without making any

	Back-	Half
Caps Alt Template Zoom ground		Cutter
STYLE		36mm	1 1/2"
OUTLINE		24mm	1"
		18mm	3/4"
		12mm	1/2"
		9mm	3/8"
		6mm	1/4"
	A
Style	Italic Vertical

3Type in the new text.

To change the style of the text in a selected area:

1 Hold down	Code		Area
	and press All to select all
of the text, or press		Area	and use	,	,
		All

, or to select only a part of it.

Functions

Cancel

changes, press .

Back- Half

Caps Alt Template Zoom ground Cutter

0.0" HELSI

36mm 1 1/2"

2Press Style until the text is displayed in the desired style. The setting is shown below STYLE at the top of the display.

MARGIN:WIDE AUTO 24mm 1"

18mm 3/4"

12mm 1/2"

9mm 3/8"

6mm 1/4"

	A
Style	Italic Vertical

To change the text style before entering the text:

1Press , , , or until the cursor is moved to the point where you want to begin using a different text style.

2Press Style until the desired style is selected. The current setting is shown below STYLE at the top of the display and a sample (A) can be seen to the right of the cursor.

Back-	Half
Caps Alt Template Zoom ground	Cutter
STYLE		36mm	1 1/2"
OUTLINE		24mm	1"
		18mm	3/4"
		12mm	1/2"
		9mm	3/8"
		6mm	1/4"

	A
Style	Italic Vertical

3 Press New Block . The selected text is displayed in the desired text style.

28