69
ERROR MESSAGE LIST
SET STAMP L ●This message appears if an L-size
stamp film cassette is not installed
when printing a stamp created
using a template for L-size stamp
film.
●Install an L-size stamp film
cassette.
SET STAMP M ●This message appears if an M-size
stamp film cassette is not installed
when printing a stamp created
using a template for M-size stamp
film.
●Install an M-size stamp
film cassette.
SYSTEM ERROR ●This message appears if there is a
problem with the machine’s soft-
ware.
●Contact your service rep-
resentative.
TAPE END. CHANGE
TAPE CASSETTE
●This message appears if the end of
the tape in the cassette has been
reached.
●Replace the tape cassette.
TEXT TOO HIGH ●This message appears if the height
of the text is larger than the width of
the installed tape.
●Reduce the number of
lines in the text, reduce
the size of the characters,
or install a tape with a
greater width.
TEXT TOO LONG ●This message appears if the length
of the text is longer than the label
length that has been set.
●This message appears if the text
typed into a line in a template
(TEMPLATE function) exceeds the
preset length.
●Delete some of the text,
reduce the character
width, or increase the set
label length.
●Enter fewer characters.
UNABLE TO
PERFORM THIS
OPERATION HERE
●This message appears if the cursor is
located in a barcode mark when
you try to paste in text or add a
character, a space, a new line, a
new block, a symbol or an accented
character.
●This message appears if the cursor is
located in a barcode mark when
you press , , , ,
, or .
●Move the cursor or delete
the barcode before trying
to add any more text.
●Move the cursor or delete
the barcode before trying
to change the text format.
ERROR MESSAGE CAUSE SOLUTION
Font Size
Width
Style
Italic
/
Vert