EMC DS-8B Rename Alias, Selection List, Add Member, Remove Member, Add Other, Alias Members

		Using Web Tools
Table 3-7Alias Tab Fields (continued)
Rename Alias	Renames the alias selected in the Alias Name field. A dialog
	displays in which you can edit the alias name. Renaming an alias
	automatically renames it in all zones.
Member	Provides a list of potential alias members, including switches,
Selection List	ports, WWNs, QuickLoop AL_PAs, and Fabric Assists.
Add Member	Adds the item selected in the Member Selection List to the Alias
	Members list. You can add individual ports or an entire switch. If
	a switch is added, all ports on the switch are added. To add a
	device WWN, select either a node WWN (folder icon) or port
	WWN (blue circle icon) from the WWN sub-tree.
Remove Member	Removes the selected member selected from the [Alias name]
	Members list.
Add Other	Adds a WWN, switch port, QuickLoop AL_PA, or Fabric Assist
	that is not available in the Member Selection List.
Alias Members	The member list of the alias selected in the Alias Name field. The
	name of this list depends on the name of the selected alias. If no
	alias is selected, the name displays as null Members.
Apply	Applies all changes made since the Zone Administration View
	was opened, including changes made on other tabs in the view.
	Changes cannot be cancelled once applied.
Cancel	Cancels all changes made since changes were last applied, and to
	exit the Zone Administration View. Changes cannot be cancelled
	once they are applied.
Done	Applies all changes made since the Zone Administration View
	was opened and to exit the Zone Administration View.

Zone Administration View 3-19

3