EMC DS-8B manual 8 Zone Tab Fields continued, Members

		Using Web Tools
Table 3-8Zone Tab Fields (continued)
Delete Zone	Deletes the zone selected in the Zone Name field.
	Deleting a zone automatically removes it from all zone
	configurations.
Rename Zone	Renames the zone selected in the Zone Name field. A
	dialog displays in which you can edit the name of the
	zone.
Member Selection	A list of potential zone members, including switches,
List	ports, WWNs, aliases, QuickLoop AL_PAs, and Fabric
	Assists.
Add Member	Adds the member selected in the Member Selection List to
	the Zone Members list. If an entire switch is selected, all
	ports on the switch are added to the zone. You can also
	select individual ports. To add a device WWN, select
	either a node WWN (folder icon) or port WWN (blue
	circle icon) from the WWNs subtree. To add an alias to the
	zone, select it from the Aliases subtree (the alias must
	already exist).
Remove Member	Removes the selected member from the [Zone name]
	Members list.
Add Other	Adds a WWN, switch, port, or QuickLoop AL_PA that is
	not listed in the Member Selection List.
[Zone name]	The members of the zone selected in the Zone Name field.
Members	The name of this list depends on the name of the selected
	zone. If no zone is selected, the name displays as null
	Members.
Apply	Applies all changes made since the Zone Administration
	View was opened, including changes made on other tabs
	in the view. Changes cannot be cancelled once they are
	applied.
Cancel	Cancels all changes since the changes were last applied
	and to exit Zone Administration. Changes cannot be
	cancelled once they are applied.
Done	Applies all changes made since the Zone Administration
	View was opened and to exit the Zone Administration
	View.
		Zone Administration View	3-21

3