EMC DS-8B manual Port icons, Port numbers, LED Status, Indicators, Power supply, Events, Telnet

3

Using Web Tools

			Table 3-12 describes the items and information available in Switch
			View.
		Table 3-12 Switch View
		Port icons	The letters in the Port icon indicate the GBIC (Gigabit Interface
			Converter) type, as follows:
			blank — No GBIC present.
			SW — Short wave GBIC
			LW — Long wave GBIC
			CU — Copper GBIC
			SWID — Short wave serial ID GBIC
			LWID — Long wave serial ID GBIC
			CUID — Copper serial ID GBIC
			A yellow outline around a port icon indicates port failure. For detailed
			port information, click the Port icon to see the Port Information View.
		Port numbers	The number of the port.
		(on the right of
		each port)
		LED Status	The color indicates the status of the port:
		Indicators	• No light — No device attached
		(round light
			• Steady yellow — Receiving light, but not online; check cable
		next to each	connections
		port)	• Slowly flashing yellow — Disabled (diagnostics or portDisable
			command).
			• Rapidly flashing yellow— Error, fault with port
			• Steady green — Online (connected with device by cable)
			• Slowly flashing green — Online but segmented (loopback cable or
			incompatible switch)
			• Rapidly flashing green — Internal loopback (diagnostic)
			• Flickering green — Online and transmitting/receiving frames
		Power supply	Removable power assemblies are updated to show presence/absence
			and status of each:
			• Green — Power supply present and operational.
			• Red X — Power supply present but not operational.
			• Cover plate — Power supply absent or not fully plugged in.
		Events	Accesses Switch Events View
		Telnet	Launches a Telnet session
3-30	Departmental Switch Models DS-16B and DS-8B Web Tools User Guide