EMC DS-8B Switch Name, Extended Fabric, Switch Disabled, Ethernet Subnetmask, Fibre Channel IP

			Administrative Interface
	Table 4-1 describes the fields on the Switch Administration tab:
Table 4-1	Switch Administration Tab
Field		Description
Switch Name		Displays or sets the switch name. To change the switch name,
		enter new name in this field.
Domain ID		Displays or sets switch domain ID. Domain IDs must be unique
		within a fabric. To change domain ID, enter new domain ID in
		this field. Use a number from 1 to 239 for normal operating mode
		(FCSW compatible) and a number from 0 to 31 for VC encoded
		address format mode (backward compatible to 1000-series
		switches).
Extended Fabric		Allows ports to be configured for long distance, or uncheck to
		turn the option off.
Switch Disabled		Disables the switch, or uncheck to enable the switch.
Ethernet IP		Displays or sets IP address for Ethernet connection to switch.
Ethernet Subnetmask		Displays or sets Ethernet subnetmask. Default value is none.
		Contact network administrator for value to enter. If changed,
		restart browser.
Fibre Channel IP		Displays or sets fibre channel IP address.
Fibre Channel Subnetmask		Displays or sets fibre channel subnetmask. If changed, restart
		browser.
Gateway IP		Displays or sets gateway IP address. Contact network
		administrator for IP address. If changed, restart browser.
Syslog Daemon IP		Displays or sets destination station IP address for sending events
		using syslog protocol to host. Contact network administrator for
		IP address. If messages are not to be sent, enter none or leave
		blank. Maximum of six IP addresses. Enter multiple addresses as
		a list, for example 192.16864.35, 192.16862.36, etc.
Port No		Returns the Port number.

Switch Administration 4-5

4