EMC DS-8B Fabric Watch, Admin, Perf, Beacon, Temp, Domain ID, Role, 12 Switch View continued

		Using Web Tools
Table 3-12Switch View (continued)
Fabric Watch	Accesses Fabric Watch
(optional
software)
Fan	The background color of the button indicates the overall status of the
	fans:
	• Green — Healthy
	• Yellow — Marginal (mix of good and faulty readings)
	• Red — Down (more than two faulty readings)
	• Gray — Unknown or unmonitored
Admin	Displays the Administrative Interface where you can perform switch
	management functions.
Perf	Displays the Performance View where you can monitor switch
	performance.
Beacon	Turns on the beaconing function. If on, this icon shows beams of light.
	The beaconing function helps to physically locate a switch by sending a
	signal to the specified switch, resulting in an LED light pattern flashing
	from side to side on the switch.
Temp	Displays temperature readings from all switch thermo sensors. The
	background color of the button indicates the overall temperature status:
	• Green — Healthy
	• Yellow — Marginal (mix of good and faulty readings)
	• Red — Down (more than two faulty readings)
	• Gray — Unknown or unmonitored
WWN	Displays the unique numeric identifier for each switch; assigned by
	manufacturer.
Domain ID	Displays the unique numeric identifier for each switch in a fabric.
Role	Indicates the current role of the switch:
	• Principal —The principal switch as defined by FC_SW protocol.
	• Subordinate — Enabled but not the principal switch.
	• Disabled — Disabled.

Switch View 3-31

3