Accessible From Switch View Port Information, Status | EMC DS-8B

			Introducing Web Tools

	Table 1-1	Web Tools Views (continued)

	Accessible From Switch View (continued):

	Port Information	Displays statistics and status for the selected port, GBIC, or loop.
	View	Also provides options for managing loops. Accessed by clicking on
		the icon for the relevant port in Switch View.

	Power Supply	The Power Supply icons on the switch graphic indicate the number
	Status	of power supplies present, and the LED on the power supply
		indicates the status of the power assemblies.

	Switch Events	Displays the error log for the switch. Accessed by clicking on Events
	View	in Switch View. This view can also be accessed through Fabric View
		(see Fabric View on page 1-3).

	Telnet Interface	Provides an interface for using Telnet commands for switch
		diagnostics, troubleshooting, and detailed fabric management.
		Accessed by clicking on Telnet in Switch View. This view can also be
		accessed through Fabric View (see Fabric View on page 1-3).

	Fabric Watch	Monitors fabric elements and displays error and performance
	View	counter status, issuing an alert when conditions are out of acceptable
		ranges. Accessed by clicking on Watch in Switch View.

	Fan Icon	The color of this icon indicates the number of fans in the switch that
		are within normal range (see the color legend in Fabric View).

	Administrative	Provides an interface for performing functions such as upgrading
	Interface	firmware versions or reconfiguring a switch. Accessed by clicking
		on Admin in Switch View. This view can also be accessed through
		Fabric View (see Fabric View on page 1-3).

	Performance	Graphically portrays real-time data throughput for each port and
	View	displays total switch bandwidth utilization. Accessed by clicking on
		Perf in Switch View.

	Beacon Icon	Click to turn the beacon, which is an indicator light on the front
		panel of the switch, on or off. Appearance of icon indicates whether
		beacon is lit.

	Temperature Icon	The color of this icon indicates the number of temperature sensors in
		the switch that are within range (see the color legend in Fabric
		View).

Web Tools Views	1-5

1

Image 19

EMC DS-8B manual Accessible From Switch View Port Information, Power Supply, Status, Fabric Watch, Fan Icon, Performance

Contents

Version Departmental Switch Models DS-16B and DS-8B Web Tools Copyright 2001 EMC Corporation. All rights reserved Trademark Information Page Contents Appendix a Customer Support Chapter Administrative Interface Figures Figures Tables Tables Preface Bold Palatino Courier, User entry. For example Courier, Arguments used in examples of command lineAsk for Customer Support Xiv Introducing Web Tools Overview Web Tools Views Administrative AdministrationView/Detail View Switch View Switch Events Status Accessible From Switch View Port InformationPower Supply Temperature Icon Introducing Web Tools Installing Web Tools Workstation SwitchRequirements Requirements Configuring Netscape Communicator InstallationSelect Edit, Preferences From Temporary Internet Files, select Delete Files Configuring Internet ExplorerClick OK To remove cached files from Internet Explorer To install the Java Plug-in on Solaris Installing the Java Plug-in on Solaris To launch Web Tools Using Web Tools Fabric View Http//switch name Zone Admin Status legend SwitchAdmin Summary/Detail View Fabric OS version Polled at or unreachableSince Name 2Summary Version Fabric View Fabric Events View To access Fabric Events View Level Num... numberTime Count Fabric Topology View 4Fabric Topology View Domain ID may be View Fabric TopologyThere are a total of n Domains in the fabric Local domain ID Path Number Destination DomainDestination’s Worldwide Name Number of Paths 6Name Server Table View Name Server Table View Refresh Symbolic NameAuto Refresh Auto Refresh Interval Hard address of the fabric port Port IP AddressIP address of the fabric port Hard Address Port Level Zoning Zone Administration ViewWWN Level Zoning Zone Administration View displays Figure Click Zone AdminConfig Tab on Delete Alias Alias TabAlias Name Create Alias Selection List CancelRename Alias Member Zone Name Zone TabCreate Zone List Delete ZoneRename Zone Member Selection QuickLoop Name QuickLoop TabCreate Qloop Rename Qloop Switch Selection ListLists the switches available to add to the QuickLoop Delete Qloop 10 describes the fields on the Fabric Assist tab Fabric Assist TabYou can use the Fabric Assist tab -10 to create and manage Fabric Assists Rename FA FA NameCreate FA Delete FA Fabric Assist name Config Name Config TabCreate Cfg Config currently ConfigurationEnable Config Config to enable 12 Switch View Switch View LED Status IndicatorsPort icons Port numbers Temp FanPerf Beacon Ether IP StateFirmware Serial # 13Switch Events View Switch Events View Num 14Port Information View Port Information View Port Module Port World Wide NamePort Status 14Port Information Fields 15 describes the fields on the PortStats tab PortStats Tab 15PortStats Tab Fields Gbic Tab Depends on the type of Gbic installed16 describes the fields on the Gbic tab Gbic Speed ConnectorIdentifier ID Name BR Min TemperatureRx Power Tx Power FL Port Transfer Loop TabFL Tenancies NL Tenancies Number of Times in Single Switch ModeNumber of Times in Dual Switch Mode Switch, Port Caused the Last Init Bypass EnableLoop Diagnostics Identify faulty devices on a loop LIP Dialog Box StartStop Close Alpa to Bypass Enable Dialog BoxInformation View , click Enable on the Loop tab Alpa to Enable Fabric Watch View 22Alarm Notifications Tab Fabric Watch View Thresholds ConfigureOrganizational tree on the left side of the window Reset DefaultGbic Classes Watched checkbox Send alarms when box 24 displays the thresholds for the Port class 25Current Settings Tab Fabric Watch View 26Performance View Performance View Using Web Tools Administrative Interface Administrative Interface 1Enter Network Password 2Switch Administration Switch Administration Ethernet Subnetmask Switch NameSwitch Disabled Extended Fabric Switch Administration Tab User Administration Remote User Name Host Name or Host IPDownload File From Password Required for FTP Reboot SwitchDownload Firmware Commit Change Disable PostReboot Switch Fastboot Switch 6SNMP Administration Snmp Administration System Location AuthenticationChanges Reset System Description 7License Administration License Administration Describes the fields on the License Administration tab Remote SwitchText Box List of the licenses installed on the switch 8Remote Switch Describes the fields on the Remote Switch tab 9QuickLoop Administration QuickLoop Administration QuickLoop Ports Enable Switch forQuickLoop Mode QuickLoop Port 10Config Admin Tab Config Admin Tab Report Switch Information 11Switch Information Report 12Extended Fabric Tab Extended Fabric Tab Optional Software 10 describes the fields on the Extended Fabric tab Telnet Interface You must have admin privilege to abort a telnet session Administrative Interface Customer Support Support Tool Figure A-1Problem Detection and Resolution Process Overview of Detecting and Resolving Problems Troubleshooting the Problem Before Calling the Customer Support Center Documenting the Problem Reporting a New Problem FTP Sending Problem Documentation Arbitrated loop 8b/10b encodingAddress identifier Alias server Glossary Class F Class of serviceDefined configuration Class EPort Enabled configurationError Domain ID Fabric OS TM FPortFabric Fabric name FPortt, FLPort Glossary Glossary Glossary Point-to-point Participating modePhantom Device Phantom address Sequence Single modeQuickLoopTM Route Glossary Well-known address Glossary Index Index