EMC DS-8B System Description, System Location, System Contact, Event Trap Level, Authentication

4

Administrative Interface

Table 4-5 describes the fields on the SNMP Administration tab:

Table 4-5SNMP Administration Fields

Field	Description
System Description	Displays or sets system description. Default is Fibre
	Channel Switch.
System Location	Displays or sets location of switch. Default is End User
	Premise.
System Contact	Displays or sets contact information for switch. Default is
	Field Support.
Event Trap Level	Sets severity level of switch events that prompt SNMP
	traps. Default is 0.
Enable	Enables authentication traps; click off to disable
Authentication	(recommended).
Traps
Read Write	Displays or sets up to three strings that work with the
Community String	SNMP set command.
Read Only	Displays or sets up to three strings that work with the
Community String	SNMP get or get-nextcommand.
Read Write and	Displays or sets recipients for traps (usually IP address of
Read Only Trap	SNMP management station).
Recipients
Commit SNMP	Applies changes made.
Changes
Reset	Resets all fields to values present when SNMP
	Administration was launched.
To disable the community string or trap recipient fields, leave them empty.

4-12 Departmental Switch Models DS-16B and DS-8B Web Tools User Guide