EMC DS-8B Enable Switch for, QuickLoop Mode, QuickLoop Ports, Bypassed Current QuickLoop

Administrative Interface

Table 4-8 describes the fields on the QuickLoop Administration tab:

Table 4-8QuickLoop Administration Fields

Field	Description
Enable Switch for	Enables switch for QuickLoop; check off to disable
QuickLoop Mode	switch for QuickLoop.
Port No	Displays the port number.
QuickLoop Port	Enables QuickLoop on port; check off to disable
Enabled	QuickLoop on port.
QuickLoop Ports	If checked, indicates a port is currently bypassed.
Bypassed
Current QuickLoop	Displays the current partner switch WWN, domain ID,
Partner	and switch name of a dual-switch QuickLoop.
Select a QuickLoop	Selects a switch from the list of switch names currently
Partner for this	in the fabric as the partner switch of a dual-switch
Switch	QuickLoop.
Submit	Applies changes made.
Reset	Resets all fields to values present when QuickLoop
	Administration was launched.
AL_PA Bitmap (in	Displays the AL_PA bitmap at the end of a QuickLoop
hexadecimal)	initialization.
Local AL_PAs	Lists the AL_PAs of devices connected to the local
	switch.
Remote AL_PAs	Lists the AL_PAs of devices connected to the remote
	switch if dual-switch QuickLoop is configured.

QuickLoop Administration 4-17

4