Kyocera 1650, 2050 During a Copy Job, During Output, Interrupt Mode, Note, 1-11, Copier Functions

Copier Functions

Interrupt Mode

The interrupt mode can be used to stop output of copying or another job temporarily and to output urgent copy or print data or received fax data. After the interrupt processing is complete, the interrupted job can be resumed.

The following modes are available for the interrupt function.

Mode	Description
Interrupt copy	• This mode can be used to stop copying and to make a copy of
	a different original at different settings. After the interrupt copy
	has been produced, the interrupted copying can be resumed at
	the same settings in effect prior to the interruption.
	• This mode can also be used to stop output of a job and to make
	a copy of another job. After the interrupt copy has been
	produced, the interrupted job is resumed.
Priority output	This mode can be used to interrupt output of a job and to output
	print data or received fax data with priority. After priority output is
	complete, the interrupted job is resumed.

Note

To use the fax functions, the optional fax kit must be installed.

During a Copy Job

1Press the Interrupt key. Interrupt mode OK

[Interrupt mode] is displayed.

2Store the originals for the current copying.

3Set the original for interrupt copying and perform copying.

4After the interrupt copying is complete, press the Interrupt key. The settings for the interrupted job are restored.

5Replace the original with the originals that have been stored. Press the Start key to resume copying.

1 Note

2

During Output

Press the Interrupt key during output. Select Interrupt mode is displayed.

If the machine has neither print data nor received fax data, Interrupt mode OK [Interrupt mode] is displayed. Proceed to step 4.

Press the S key or the T key to select the desired

interrupt mode.Select Interrupt mode. Interrupt copy Priority:Printer Priority:Fax

1-11