Kyocera 1650, 2050 Registering a Program, Using a Program to Make Copies, Program Function, 1-32

Copier Functions

Program Function

Up to eight combinations of copy modes and functions displayed on the operation panel can be registered as a single program.

Registering a Program

1

2

3

4

5

Set the desired copy modes, etc., to be registered.

Press the Program key.

Press the S key or the T key to select Register program.

Press the Enter key.

Press the S key or the T key to select the program number to register (1 to 8).

Program:

Program #7 Program #8 Register program.

Register program: Program #1 Program #2 Program #3

Note

6

You can also select the program number using a numeric key.

Press the Enter key. The program is registered.

Using a Program to Make Copies

1Press the Program key.

2Press the S key or the T key to select the program number to recall.

Program:

Program #1

Program #2

Program #3

Note You can also select the program number using a numeric key.

3Press the Enter key.

4Set the originals and press the Start key. Copying starts with the settings that were registered.

1-32