Kyocera 2550, 2050, 1650 Output Destination, Override A4/Letter, tray, Finisher, Separator, A4/LT

Printer Settings

3Press the Enter key.

4Press the S key or the T key to select Short edge bind or Long edge bind.

Duplex Mode

Back

None

Short edge bind

5Press the Enter key.

6Press the Reset key. The message display returns to the printer basic screen.

Output Destination

Set the paper output destination.

Setting		Output destination
Top	tray	Output tray of main body
Finisher		Optional finisher
Job	Separator	Optional job separator

Note

1

2

3

4

This item is displayed only if the optional finisher or job separator is installed.

Display the Paper Handling screen. (See How to Display the Paper Handling Screen on page 2-47.)

Press the S key or the T key to select Stack
	Paper Handling
Select [Stack Slect].
		Bypass Mode
		Feed Select
		Stack Select
Press the Enter key.
Press the S key or the T key to select the desired
	Select Output Tray
paper output destination.
		Back
		Top tray
		Finisher

5Press the Enter key.

6Press the Reset key. The message display returns to the printer basic screen.

Override A4/Letter

The A4 and 8 1/2 × 11" (Letter) sizes can be regarded as a size that can be used in common.

1Display the Paper Handling screen. (See How to Display the Paper Handling Screen on page 2-47.)

2Press the S key or the T key to select Override Paper Handling

A4/LT.	Feed Select
	Stack Select
	Override A4/LT

3Press the Enter key.

2-49