Kyocera 2050, 1650, 2550 manual Auto Clear Timer

System Menu

5Press the Enter key.

6Press the Reset key. The message display returns to the copier basic screen.

Auto Clear

You can set the auto clear function (refer to Chapter 1 in Basic Operation Guide, Auto Clear Function) that will be activated when the preset time elapses after copying is complete.

1Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

2Press the S key or the T key to select Auto Clear. Machine default:

PIN # Change
Auto Sleep	: On
Auto Clear	: On

3Press the Enter key.

4Press the S key or the T key to select On or Off.

Auto Clear:

Off

*On

5Press the Enter key.

6Press the Reset key. The message display returns to the copier basic screen.

Note

1

2

3

4

5

6

Auto Clear Time

Set the time that elapses from completion of copying to activation of the auto clear function if you have turned On the auto clear function (see page 3-24).

Time that can be set: 10 to 270 seconds (in 10 second increments)

This item is not displayed if the auto clear function is off.

Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

Press the S key or the T key to select Auto Clear
	Machine default:
Timer [Auto clear time].
		Auto Sleep	: On
		Auto Clear	: On
		Auto Clear Time	: 90Sec.
Press the Enter key.
Press the < key or the > key to set the time to 10 to 270
	Auto Clear Timer:
seconds.

90Sec. 10-270Sec.

Press the Enter key.

Press the Reset key. The message display returns to the copier basic screen.

3-24