Kyocera 2550, 2050, 1650 manual Emulation Mode Selection, 2-22, Printer Settings

Printer Settings

Emulation

Note You can set the emulation for each interface.

Emulation Mode Selection

Emulation modes that can be used with this machine: PCL6, KC-GL, KPDL, KPDL (AUTO), Line Printer, IBM Proprinter, Diablo 630, EPSON LQ-850

If you set KC-GL, you can set the thickness of the pen and the page size.

If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be automatically performed according to the print data.

If you set KPDL or KPDL (AUTO), the details of any error that occurs during printing can be printed.

1Press the Printer key.

2Press the S key or the T key to select MENU.

Ready

GO CANCEL MENU

3Press the Enter key.

4Press the S key or the T key to select Emulation.

Menu

Print Status Page

Interface

Emulation

5Press the Enter key.

6Press the S key or the T key to select the desired interface.

Interface

Back

Parallel

Network

7Press the Enter key.

8Press the S key or the T key to select the desired emulation.

Emulation

Back

PCL 6

KC-GL

9Press the Enter key.

If you have selected KC-GL, set KC-GL Pen Thickness.

If you have selected KPDL or KPDL (AUTO), set KPDL Error Printing.

If you have selected KPDL (AUTO), perform KPDL (AUTO) Alternative Emulation Selection.

2-22