Kyocera 1650, 2050, 2550 manual Sort Copying, 1-17, Copier Functions

Copier Functions

Sort Copying

Since copying in this mode is performed after multiple originals have been scanned and memorized, a required number of collated copy sets can be produced.

Note If the optional document processor is installed, you can select whether or not to turn on the sort mode at a default setting. (See Sort Copying on page 3-8.)

1 Set the original.

2 Press the Sort key.

3Input the number of copies and press the Start key. Scanning of the original starts.

If the originals have been set in the optional document processor, copying starts automatically.

If the original has been set on the platen, a message prompting replacement of the original is displayed. In this case, proceed to the next step.

4Replace the original and press the Start key. Scanning of the original is performed.

5When all originals have been scanned, press the Enter key. Copying starts.

1-17