Kyocera 2050, 1650, 2550 manual Continuous Copying, 1-28, Copier Functions

Copier Functions

Continuous Copying

The continuous copying function allows multiple originals to be separated into some blocks, to be scanned at more than one time, and to be copied in one batch. Since multiple originals of the same type are scanned in multiple steps to accumulate data in memory, many originals can be copied in one batch.

1Set the originals.

2Press the Function key.

3Press the S key or the T key to select Continuous scan.

Function:
	End
	Orig. direction	: Rear
	Continuous scan	: Off

4Press the Enter key.

5Press the S key or the T key to select On.

Continuous scan: *Off

On

6Press the Enter key.

7Press the S key or the T key to select End.

8Press the Enter key.

9Press the Start key. Scanning of originals starts.

10Replace the originals and press the Start key. Scanning of originals of the next step starts.

11When all originals have been scanned, press the Enter key. Copying starts.

1-28