Kyocera 2050, 1650 Copy Restriction, Setting Limit of Use, Limit in use End Copy Able use Printer

Job Accounting

Setting Limit of Use

You can set the limit of use for each registered account.

The items that can be set are shown below.

Item	Description of limit	Reference
		page
Copy restriction	Select whether to permit or prohibit copying.	4-5
	Able to use — Permits copying.
	Unable to use — Prohibits copying.
Print restriction	Select whether to permit or prohibit printing.	4-6
	Able to use — Permits printing.
	Unable to use — Prohibits printing.
Output limit	Set the limit of total count of copying and printing.	4-6
	No limit — Does not set the limit of count.
	Counter limit — Set the limit of count (0 to 999,999).
Scanner	Set the limit of count of scanner transmission if the optional	4-7
transmission limit	network scanner kit is installed.
	No limit — Does not set the limit of count of scanner
	transmission.
	Counter limit — Set the limit of count of scanner
	transmission (0 to 999,999).
	Is not permitted — Prohibits use of scanner transmission.
Fax transmission	Set the limit of count of fax transmission if the optional fax kit is	4-7
limit	installed.

No limit — Does not set the limit of count of fax transmission.

Counter limit — Set the limit of count of fax transmission (0 to 999,999).

Is not permitted — Prohibits use of fax transmission.

Note You can change the management method so that you can set the limit of count for copying and printing respectively. For details, refer to the KM-NET for Accounting Operation Guide.

Copy Restriction

You can select whether to permit or prohibit copying.

Note This item is displayed if Copier Job Accounting in the default settings is set to On. (See page 4-13.)

1Display the Limit in use screen referring to steps 1 to 7 of Registering a New Account.

2	Press the S key or the T key to select Copy.
		Limit in use:
			End
			Copy	: Able use
			Printer	: Able use

3Press the Enter key.

4-5