Kyocera 2050 Appendix-14, Secondary setting has priority, Conditions are limited for combination

Appendix

Secondary setting has priority.

1The machine clears prior setting and gives priority to the later setting.

2The machine enters the manual exposure mode because auto exposure is not available in the image quality mode for photo.

3The machine sets the 100 % magnification and the auto paper selection mode because the auto selection mode is available only in the auto paper selection mode.

4The machine sets the original orientation to rear because the orientation for double-page spread originals is fixed to rear.

5The machine sets the original orientation to rear because the orientation in the border erase mode (book erase) is fixed to rear.

6The machine sets the automatic detection of original size because original size selection (size input) is not available for double-page spread originals.

7The machine sets the auto zoom ratio selection mode because combine copying is available only in the auto zoom ratio selection mode.

8The machine clears offset copying because it cannot be used with staple copying.

9The machine cancels the auto zoom ratio selection mode and sets the manual zoom mode.

10The machine changes the paper feed station because the combination is not available.

Combination is not accepted. (Secondary setting is not accepted.)

21The auto exposure mode is not available in the image quality mode (photo).

22Only automatic detection for original size selection is available in the auto selection mode.

23Only the auto paper selection mode is available in the auto selection mode.

24Staple copying is not available in the auto selection mode.

25Duplex copying (one-sided to two-sided) is not available in the auto selection mode.

26Double-page spread originals cannot be used in the auto selection mode.

27The magnification ratio is fixed to 100 % in the auto selection mode.

28The border erase mode is not available in the auto selection mode.

29Combine copying is not available in the auto selection mode.

30Combine copying is not available for double-page spread originals.

31Original size selection (size input) is not available for double-page spread originals.

32Original orientation is fixed to landscape for double-page spread originals.

33Combination of margin mode and combine copying is not available.

34The border erase mode is not available with original size selection (size input).

35Original orientation is fixed to landscape for the border erase mode (book erase).

36Combine copying is not available with original size selection (size input).

37The auto zoom ratio selection mode is selected for combine copying.

38Offset copying is not available for staple copying.

39Combination with multi-bypass tray setting (universal size, size input) is not available.

Conditions are limited for combination.

41For original sizes other than A3, A4R, A5R, B4, B5R, 11 × 17" (Ledger), 8 1/2 × 11" (Letter), and 8K, this machine changes the original size selection to automatic detection and sets the double-page spread original mode.

42Setting is available for original sizes of A3, A4R, A5R, B4, B5R, 11 × 17" (Ledger), 8 1/2 × 11" (Letter), and 8K. Setting is not available for other sizes.

43Setting is not available in the image quality mode for photo. For other modes, the manual exposure mode is canceled and the auto exposure mode is set.

44If the auto rotation copying setting is turned off, stapling copying is also turned off (staple copying cancellation message is displayed). If the auto rotation copying is turned on, stapling copying setting is not changed.

45For staple copying, sort copying is always set. Sort copying cannot be canceled.

46Copying is not available with multi-bypass tray setting (universal size, size input). (An error message is displayed.)

47If the original orientation is set to rear and the binding side is set to top or the original orientation is set to left and the binding side is set to left for copying from the document processor, copying is not available with multi-bypass tray setting (universal size). (An error message is displayed.)

Appendix-14