Kyocera 1650, 2050, 2550 manual Auto Low Power Time, Copy Output Destination, Low power mode time

System Menu

6Press the Reset key. The message display returns to the copier basic screen.

1

2

3

4

5

6

Auto Low Power Time

Set the time that elapses before the low power mode is automatically activated. Time that can be set:

Inch Specification — 1 to 240 minutes (in 1 minute increments)

Metric Specification — 1 to 120 minutes (in 1 minute increments)

Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

Press the S key or the T key to select Low power
	Machine default:
time.
		Orig. direction	: Rear
		Sleep mode time	: 30Min.
		Low power time	: 15Min.
Press the Enter key.
Press the < key or the > key to select the desired time
	Low power mode time:
from 1 to 240 minutes [1 to 120 minutes].

15Min. 1-240Min.

Press the Enter key.

Press the Reset key. The message display returns to the copier basic screen.

Note

1

2

3

4

Copy Output Destination

Set the paper output destination with priority for copying.

Setting item		Output destination
Top	tray	Output tray of main body
Finisher Tray Output Optional finisher
Job	separator	Optional job separator

This item is displayed only if the optional finisher or job separator is installed.

Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

Press the S key or the T key to select Copy Otput
	Machine default:
Destn.
			Sleep mode time	: 30Min.
			Low power time	: 15Min.
			Copy Otput Destn : Top tray
Press the Enter key.
Press the S key or the T key to select the desired
	Copy Output Destination:
output destination.
		*	Top tray
			Finisher Tray Output

3-19