Kyocera 1650, 2050 Auto Continue time, Duplex Printing Error Detection, 2-54, Printer Settings

Printer Settings

3Press the Enter key.

4Press the S key or the T key to select On or Off.

Auto Continue

Back

On

Off

5

6

Press the Enter key. If you have selected On, Change # is displayed.

To set the time that elapses before auto continue is
	Auto Continue
activated, press the S key or the T key to select
		On
Change #.
		Off
		Change #

7

8

Press the Enter key. The Auto Continue (time) screen is displayed.

Press the < key or the > key to input the time. You can
	Auto Continue (time)
set the time to 0 to 495 seconds in 5 second
increments.			sec. (0	495)
		30

9Press the Enter key.

10Press the Reset key. The message display returns to the printer basic screen.

Duplex Printing Error Detection

This setting is available if the optional duplex unit is installed. You can select whether or not to display Duplex disabled Press GO when you select duplex printing and specify a paper type that cannot be used for duplex printing such as label.

Setting	Processing
On	•	If you select GO, one-sided printing is performed.
	•	If you select CANCEL, printing is canceled.
Off	One-sided printing is performed.

1

Display the Others screen. (See How to Display the Others Screen on page 2-51.)

2

3

4

5

Press the S key or the T key to select Finishing Error.

Press the Enter key.

Press the S key or the T key to select Proces. Duplex print.

Press the Enter key.

Others

Resource Prot.

Auto Continue

Finishing Error

Finishing Error

Back

Proces. Duplex print Staple Setting

2-54