Kyocera 2550, 2050, 1650 manual Custom Paper Type, 3-17, System Menu

System Menu

Note

1

2

3

4

5

6

Custom Paper Type

Printing onto prepunched paper, preprinted paper or letterhead in the one-sided mode and the two-sided mode from the same paper source may cause displacement of hole positions or reverse orientations on both sides in two-sided printing. Set Match Print Direction to match the orientation in one-sided printing and two-sided printing.

Example: Paper is set as shown in the illustration.

Setting One-sided printing Two-sided printing

Match Print

Direction

Fast Mode

•Setting of Match Print Direction will decrease the speed of one-sided printing a little.

•With the setting of Match Print Direction, set the paper with the side for the first page face-down as shown in illustration A. (If the optional finisher is installed, set the paper with the side for the first page face-down as shown in illustration B.)

AB

•If the optional finisher is installed, the stapling mode may cause incorrect orientation of printing depending on the stapling position.

Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

Press the S key or the T key to select Special
	Machine default:
P.type.
		P. type (Weight)
		P. type (Duplex)
		Special P. type : Fast Mode
Press the Enter key.
Press the S key or the T key to select Match Print
	Specific Paper Type:
Direction or Fast Mode.
		Match Print Direction
		* Fast Mode

Press the Enter key.

Press the Reset key. The message display returns to the copier basic screen.

3-17