Kyocera 1650 Appendix-3, Paper Sizes, Multi-bypass tray, Cassette or multi-bypass tray, Thickness

Appendix

Paper Sizes

The following table lists the sizes of paper that can be used in the cassette or multi-bypass tray.

The dimensional tolerances are ±0.7 mm for both length and width of paper. The corner angles must be 90 ° ±0.2 °.

Multi-bypass tray	Cassette or multi-bypass tray
B6R (128 × 182 mm)	A3 (297 ×		420 mm)
A6R (105 × 148 mm)	B4 (257 ×		364 mm)
Postcard (100 × 148 mm)	A4 (297 × 210 mm)
Return postcard (148 × 200 mm)	A4R (210 × 297 mm)
Executive (7 1/4 × 10 1/2")	B5 (257 × 182 mm)
Envelope DL (110 × 220 mm)	B5R (182 × 257 mm)
Envelope C5 (162 × 229 mm)	A5R (148 × 210 mm)
Envelope C4 (229 × 324 mm)	Folio (210 × 330 mm)
ISO B5 (176 × 250 mm)	11 × 17" (Ledger)
Comm.#10 (4 1/8 × 9 1/2")	8	1/2 × 14" (Legal)
Comm.#9 (3 7/8 × 8 7/8")	11 × 8 1/2"
Comm.#6-3/4 (3 5/8 × 6 1/2")	8	1/2 × 11" (Letter)
Monarch (3 7/8 × 7 1/2")	5	1/2 × 8 1/2" (Statement)
YOUKEI 2 (114 × 162 mm)	8	1/2 × 13" (Oficio II)
YOUKEI 4 (105 × 235 mm)	8K (273 × 394 mm)

16K (197 × 273 mm)

Custom: 3 7/8 × 5 7/8" to 11 5/8 × 17", 98 × 148 to 297 × 432 mm

Smoothness

Although paper should have smooth and even surfaces, do not use paper with surface coating. Paper with too smooth surfaces may cause multiple-sheet feeding, resulting in paper jams.

Basis weight

Basis weight is the weight of paper expressed in grams per square meter (g/m²). Paper that is too heavy or too light may cause feed errors or paper jams as well as premature wear of the product. Uneven weight of paper, namely uneven paper thickness may cause multiple-sheet feeding or print quality problems such as blurring because of poor toner fusing.

The recommended basis weight is between 60 and 105 g/m² (16 and 28 lb/ream) for the cassette and between 45 and 160 g/m² (12 and 42 lb/ream) for the multi-bypass tray.

Thickness

Paper used by the printer should be neither too thick nor too thin. If multiple-sheet feed or frequent paper jams occur, the paper may be too thin. Also if the paper is too thick, paper jams may occur. The recommended thickness of a sheet for this printer is between 0.086 and 0.110 mm.

Moisture Content

Moisture content is expressed with the percentage of moisture relative to dryness. Moisture affects paper feeding, electrostatic properties, and toner fusing onto the paper.

The moisture content of paper varies with the relative humidity in the room. If the room is too humid and paper absorbs more moisture, the edges may swell and the paper may become wavy. If the room is too dry and the paper loses moisture, the edges shrink and tighten, and the print contrast may be degraded.

Appendix-3