Kyocera 2050, 1650, 2550 manual Original Orientation, Auto Sleep Time, Sleep mode

System Menu

1

2

3

4

Original Orientation

Set the default original orientation.

Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

Press the S key or the T key to select Orig.
	Machine default:
direction.
			P. type (Duplex)
			Special P. type	: Fast Mode
			Orig. direction	: Rear
Press the Enter key.
Press the S key or the T key to select Rear [Back
	Orig. direction
Edge] or Left top [Left].
		*	Rear
			Left top

5Press the Enter key.

6Press the Reset key. The message display returns to the copier basic screen.

Note

1

2

3

4

5

Auto Sleep Time

Set the time that elapses before the auto sleep function is activated if you have turned on the auto sleep function (see page 3-23).

Time that can be set:

Inch Specification — 1 to 240 minutes (in 1 minute increments)

Metric Specification — 1 to 120 minutes (in 1 minute increments)

•It is recommended to set a longer time if you use the machine frequently, and to set a shorter time if not.

•For the inch specification machine, if the auto sleep function causes inconvenience for operation of this machine, disable this function. It is recommended, however, to set a longer time before disabling this function.

•On the inch specification machine, if you have disabled the auto sleep function, this item is not displayed.

Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.)

Press the S key or the T key to select Sleep mode
	Machine default:
time.
		Special P. type	: Fast Mode
		Orig. direction	: Rear
		Sleep mode time	: 30Min.
Press the Enter key.
Press the < key or the > key to select the desired time
	Sleep mode:
from 1 to 240 minutes [1 to 120 minutes].

30Min. 1-240Min.

Press the Enter key.

3-18