Kyocera 2550 Limit of Number of Copies, Black Streaking Reduction Processing, Copy limit 999 sets

System Menu

Limit of Number of Copies

Set the limit of the number of copies that can be set at a time.

1Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)

2Press the S key or the T key to select Copy Limit. Copy Default :

Margin Width	: 1/4"
BorderEraseWidth	: 1/4"
Copy Limit	: 999Set

3

4

5

Press the Enter key.

Use the numeric keys to set the maximum number of copies (1 to 999).

Press the Enter key.

Copy limit:

999 sets

# keys

6

Press the Reset key. The message display returns to the copier basic screen.

1

2

3

4

Note

5

6

Black Streaking Reduction Processing

If black streaks (streaks that are not contained in the original image) appear on copies from the optional document processor, you can make black streaking less noticeable. Since the black streaking reduction processing reduces the reproducibility of fine characters, it is normally recommended to use the factory default setting.

Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.)

Press the S key or the T key to select Corr. Black
	Copy Default :
line.
		BorderEraseWidth	: 1/4"
		Copy Limit	: 999Set
		Corr. Black line	: None
Press the Enter key.
Press the S key or the T key to select None, Weak or
	Correct. fine black line:
Strong.		* None
		Weak
		Strong

To use the black streaking reduction processing, first select Weak. If black streaking is not reduced, select Strong.

Press the Enter key.

Press the Reset key. The message display returns to the copier basic screen.

3-11