Kyocera 2050, 1650, 2550 manual Original Orientation, 1-10, Copier Functions, Rear, Left top

Copier Functions

Original Orientation

You must specify the orientation of the original when using the following functions: duplex copying, split copying (from 2-sided originals), margin mode, border erase mode, combine copying, auto selection mode (optional), and staple copying (optional).

When the originals are set on the platen:

Original Rear Left top

When the originals are set in the document processor:

Original Rear Left top

Note

You can change the default setting of the orientation of the original. (See Original Orientation on page 3-18.)

1

2

3

Press the Function key.

Press the S key or the T key to select Orig.

direction.

Press the Enter key.

Function:
	End
	Orig. direction	: Rear
	Continuous scan	: Off

4

Press the S key or the T key to select Rear [Back
	Orig. direction:
Edge] or Left top [Left].
		*	Rear
			Left top

5Press the Enter key.

1-10