Kyocera 2550, 2050 Border Erase Mode, Border Erase width, 1-27, Copier Functions, Sheet Erase

Copier Functions

Border Erase Mode

Shadows that may appear around the edges of copies can be erased.

The following modes are available for border erase function.

Mode	Description
Sheet Erase	Use this mode to erase shadows that may appear around the edges of
	copies made from sheet originals. You can set the width of the border
	to be erased to 1/8" to 3/4" in 1/8" increments [1 mm to 18 mm in 1 mm
	increments].
Book Erase	Use this mode to make clean copies from a thick book. You can set the
	width of the border to be erased to 1/8" to 3/4" in 1/8" increments
	[1 mm to 18 mm in 1 mm increments].

Note You can set the default value of the border erase width. (See Border Erase Width Default Value on page 3-10.)

1 Set the original.

2Press the Border Erase key.

3Press the S key or the T key to select Sheet Erase or Book Erase.

Border Erase:

Sheet Erase

Book Erase

4Press the Enter key.

5Press the < key or the > key to set the border erase width. You can set the width to 1/8" to 3/4" in 1/8" increments [1 mm to 18 mm in 1 mm increments].

6Press the Enter key.

7Press the Start key. Copying starts.

Border Erase width:

1/4" 1/8" 3/4"

1-27