3. Energy Saving Mode

This equipment is designed to enter into the energy saving mode automatically to lower its power con-

sumption when a specified period of time has passed since the last use of the equipment (=automatic 1 energy saving mode). In this mode, “Saving energy - press START button” appears. Then after a certain

period of time, the display on the touch panel disappears and the [ENERGY SAVER] button lights in green. This mode is automatically cleared upon reception of printer data, a FAX, Internet FAX or e-mail.

The period to enter into the energy saving mode is set at 15 minutes by default at the time of installation of the equipment. See the User Functions Guide for change of this setting.

The equipment can also be made to enter the energy saving mode manually by means of the following procedure.

1 Press the [ENERGY SAVER] button on the control panel.

2 Press the [SLEEP] button on the touch panel.

The equipment enters into the energy saving mode. During this mode, the display on the touch panel disap- pears and the [ENERGY SAVER] button lights in green.

To canceling the energy saving mode

Press the [ENERGY SAVER] button on the control panel again. The energy saving mode is cleared and the equipment will be ready for copying.

The energy saving mode is also cleared by pressing any button of [COPY], [SCAN], [FAX], [e-FILING] and [START].

The [SCAN] button is enabled only when the Printer/Scanner Kit or the Scanner Kit (both optional) is installed.

The [FAX] button is enabled only when any of the FAX Unit, Printer/Scanner Kit and Scanner Kit (all optional) is installed.

33

Page 35
Image 35
Toshiba 850, 720 manual Energy Saving Mode, To canceling the energy saving mode