4.Setting Copy Paper (Cont.)

Changing the setting of paper size

If the setting of the paper size registered in the equipment does not correspond to the one in the drawer, it

1 could cause a paper jam. In this case, replace the paper corresponding to the setting of the paper size ( P.37 “Placing paper in the drawer”), or change the setting of the paper size according to the following pro- cedure.

1 Press the [USER FUNCTIONS] button on the control panel.

2 Press the [USER] button on the touch panel to enter the user setting menu, then press the [GENERAL] button.

3 Press the [DRAWER] button on the touch panel.

40

1.BEFORE USING EQUIPMENT

 

Page 42
Image 42
Toshiba 720, 850 manual Changing the setting of paper size