Toshiba 720, 850 manual 256, Store to e-Filing

6.Error Code (Cont.)

	Error code	Problem	What to do
	2D67	FTP service is not	Ask your administrator whether the FTP service is configured
		available.	correctly.
	2D68	File Sharing service is	Ask your administrator whether the SMB protocol is enabled.
		not available.
	2DC0	Job canceled	Job was canceled.
	2DC1	Power failure occurred	Make sure that the power cable is connected properly and it is
			inserted securely. Resend the job.
	Store to e-Filing
	2B10	There was no applica-	Turn the power OFF and then back ON. Retry the scan. If the
		ble job.	error still occurs, contact your service representative.
	2B11	Job status failed.	Turn the power OFF and then back ON. Retry the scan. If the
			error still occurs, contact your service representative.
	2B20	Failed to access file.	Turn the power OFF and then back ON. Retry the scan. If the
			error still occurs, contact your service representative.
	2B30	Insufficient disk space.	Delete unnecessary documents in e-Filing and try again.
	2B31	Failed to access Elec-	Make sure that the specified e-Filing or folder exists. (If not, this
		tronic Filing.	error would not occur.). Turn the power OFF and then back ON.
			Delete the specified e-Filing or folder and reset them. Retry the
			job in error. If the specified e-Filing or folder cannot be deleted,
			contact your service representative.
8	2B32	Failed to print Elec-	Make sure that the specified document exists. (If not, this error
		tronic Filing document.	would not occur.).Turn the power OFF and then back ON.
			Delete the specified document. If the specified document can-
			not be deleted, contact your service representative.
	2B50	Failed to process	Turn the power OFF and then back ON. Retry the scan. If the
		image.	error still occurs, contact your service representative.
	2B51	Failed to process print	Make sure that the Function List can be printed out. Retry the
		image.	print. If the error still occurs, contact your service representative.
	2B90	Insufficient Memory.	Turn the power OFF and then back ON. Retry the scan. If the
			error still occurs, contact your service representative.
	2BA0	Invalid Box password	Make sure that the password is correct and retry the scan, or
		specified.	reset the password and retry the scan. When this error occurs
			for the print of the data in the e-Filing, perform the print with the
			administrator's password. If the recovery is still not completed or
			in case of invalid password for the operation other than printing
			(opening the file, etc.), contact your service representative.
	2BB0	Job canceled	Job was canceled by the user.
	2BB1	Power failure occurred	Make sure that the power cable is connected properly and it is
			inserted securely.
	2BC0	System fatal error.	Turn the power OFF and then back ON. Retry the print. If the
			error still occurs, contact your service representative.
	2BC1	Failed to acquire	Turn the power OFF and then back ON. Retry the print. If the
		resource.	error still occurs, contact your service representative.
	2B60	The folder was	Check the folder to be made.
		renamed. A folder of
		the same name
		already existed.

256 8.JOB STATUS