Toshiba 850, 720 manual 161, Range of the tab width and shift width, Tab width Shift width, Bypass

4 Adjust the tab width and the shift width using the [0 mm] or [30 mm] button, and then press the [ENTER] button.

•Press [TAB EXTENSION] or [SHIFT MARGIN] to switch the item to be set.

•The initial value is set to 13 mm (0.5") for both the tab width and the shift width.

•The default setting value can be changed for both the tab width and the shift width. For details, refer to the User Functions Guide.

Range of the tab width and shift width

The range of the tab width and the shift width is different between when the tab paper is set in the drawer and when it is set on the bypass tray.

	Tab width	Shift width
Drawer	12 to 17 mm	0 to 30 mm
	(0.4" to 0.6")	(0 to 1.1")
Bypass	10 to 20 mm	0 to 30mm	5
tray	(0.4" to 0.7")	(0 to 1.1")

Measuring the tab width and shift width

The tab width and the shift width can be measured by the scale on the left side and rear side of the original glass. The marks of the original scale have a 2 mm (0.08") pitch.

•Measuring the tab width

Place tab paper on the original glass to measure the tab width.

Tab width

Original scale

Align the tab paper with the original scale

•Measuring the shift width

Place the original on the original glass to measure the shift width.

Shift width

Original scale

Align the original with the original scale

161