Toshiba 720, 850 manual General Copying Procedures, Initial Default settings

2

1. General Copying Procedures

Set originals after placing paper or confirming that there is paper in the drawers. When the [START] button on the control panel is pressed with any of the settings unchanged, copies are made in the initial (default) settings. You can make copies as desired by setting various copy modes.

Initial (Default) settings

When the power is turned on, when the energy saving mode is cleared, and when the [FUNCTION CLEAR] button on the control panel is pressed, various setting items are automatically set. These items are called the initial (default) settings. These initial settings can be changed as desired. See the User Functions Guide for details.

The table below lists the various items of the initial settings at the time of installation of this equipment.

Item	Initial (Default) setting
Reproduction ratio	100%
Copy quantity	1
Paper selection	Automatic Paper Selection (APS)
Original -> Copy	1-Sided -> 1-Sided
Density adjustment	Automatic copy density adjustment
Image quality	TEXT/PHOTO MODE
Finishing mode	Placing originals on the original glass: Non-sort/
	Non-staple mode
	Placing originals on the Reversing Automatic Doc-
	ument Feeder: Sort mode
Using Reversing Automatic Document Feeder	Continuous feed mode

Copying procedure

1 Place paper in the drawer(s).

• For the types and sizes of paper selectable, see P.35 “Copy paper types and sizes”.

When the desired size or type of paper is not in any of the drawers or the External Large Capacity Feeder, see the following pages.

-P.37 “Setting copy paper (size change) / Setting the drawer for special uses”

-P.45 “Setting paper in the External Large Capacity Feeder (optional)”

-P.63 “6.Bypass Copying”

48 2.HOW TO MAKE COPIES