Toshiba 720, 850 manual Bypass copying on non-standard size paper, Place the originals

6.Bypass Copying (Cont.)

Bypass copying on non-standard size paper

Non-standard size paper should be within the following ranges: A (Length): 3.9" to 11.7", B (Width): 5.8" to 17"

2

B A

1 Place some sheets of paper with their copy side up on the bypass tray, and align the side guides to the paper length.

•The message “Ready for bypass feeding” appears.

•Rear side of the side guides of the bypass tray has an indicator for paper height. The height of the sheets must not exceed this indicator.

•When you use more than one sheet, fan the sheets well before setting them on the tray.

•Do not push the sheets into the entrance of the bypass feeder; it may cause a paper jam.

When the paper size is larger, draw out the three-stage paper holder.

2 Place the original(s).

68 2.HOW TO MAKE COPIES