Toshiba 720, 850 104, Select LT copy size, Open and place the first pages on the original glass

4.Duplex Copying (Cont.)

5 Select LT copy size.

•Only LT size is available. Press the drawer button on the touch panel, or use the paper source selection (/) buttons to select LT size.

3

• If you need a binding space, select the book margin mode. ( P.114 “1.IMAGE SHIFT”) - Set other copy modes as required.

6 Open and place the first page(s) on the original glass.

Do not place heavy objects (9 lb. or more) on the original glass and do not press on it with force. Breaking the glass could injure you.

• Center the booklet on the yellow indicator line with its bottom toward you.

7 Press the [START] button. When the data of the opened pages have been scanned, open the next page and set the booklet on the original glass again.

•Repeat the procedures above until all the desired pages have been scanned. If the last copy is only a single page, press the [COPY FINAL PAGE] button on the touch panel before the scanning of this page is started.

104 3.SETTING OF BASIC COPY MODES