Toshiba 850, 720 manual Hole punch mode optional

Hole punch mode (optional)

When the Hole Punch Unit (optional) is installed to the Finisher or the Saddle Stitch Finisher (both optional), you can punch holes in the copies.

•The available copy paper sizes for this mode are LD, LG, LT, LT-R and COMP.

•The paper weight applicable for this mode is 17 lb. Bond to 140 lb. Index.

•Special paper such as OHP films or sticker label cannot be used for hole punching.

1	Place paper in the drawer(s).	3
	• When using this mode in bypass copying, specify the paper size in advance. ( P.63 “6.Bypass Copying”)
2	Place the original(s).
3	Press the finisher button on the basic menu.

4 Press the [HOLE PUNCH] button.

• Set other copy modes as required.

5 Press the [START] button.

When the Inserter Unit (optional) is installed, you can punch holes without the need to go through any copying operation by setting paper on the unit.

93