![](/images/new-backgrounds/1184262/184262207x1.webp)
Smoothing mode | Disabled |
Reduction mode | Disabled |
Alternate Graphics Mode | Disabled |
Automatic emulation switching mode | Disabled |
The default setting is
DIP Switch Settings
The DIP switch settings control various printer functions, such as the page length and character set you want to use. The printer functions defined by the DIP switches are determined by the printer control mode. The printer has two control modes:
§
§Epson LQ mode, which emulates the Epson LQ printers
DIP switch 11 selects the printer control mode. When DIP switch 11 is OFF, the printer is in BJ mode (this is the default). When DIP switch 11 is ON, the printer is in Epson LQ mode.
BJ-10 Mode
When the printer is in
DIP switch | Function | OFF | ON | |
1 | Horizontal print | Letter size or | A4 size | |
| position | envelope |
| |
2 | Text scale mode | Disabled | Enabled | |
3 | Page length | 11 inches | Disabled | |
4 | Character set | Set 1 | Set 2 | |
5, 6, 7 | Code page | See following descriptions |
| |
8 | Automatic carriage return (CR) | Line feed (LF only) | LF with CR | |
9 | Alternate Graphics Mode (AGM) | Disabled | Enabled | |
10 | Buffer size | Input: 62 KB | Input: 21 KB | |
Download: 0 KB | Download: 41 KB | |||
|
| |||
11 | Printer control mode | Epson LQ mode | ||
12 | Automatic emulation switching | Disabled | Enabled |
DIP switch 1
Use this switch to change the horizontal print position according to the size of your paper. If you are using
DIP switch 2
If you are using a software application that assumes 66 lines will fit on each page, set this switch to ON. The printer will reduce the line spacing by a factor of 14/15, which is from 62 lines per page to 66 lines per page if line spacing is set to 6 lines per inch (lpi).
DIP switch 3
If you are using